How To Change Mower Blades Cub Cadet

Turn the mower off and make sure the engine is cool. Remove the bolt that secures the blades to the spindle.

Pin On My Saves

Turn the deck over to expose the blades.

How to change mower blades cub cadet. Slide the new blade onto the spindle with the wind wing of the blade pointing toward the top of the deck. Wearing gloves for protection use the Universal Blade Removal Tool to secure the blades. Removing and installing lawn mower blades on a Cub Cadet LTX 1050.

Replace the hex flange nut the nut that holds the blade on and tighten with your fingers. Prepare your riding mower for maintenance. How to change blade on a cub cadet riding lawn mower.

Place your mower on a flat level surface. Remove the deck drive belt from the engine pulley. Carefully pull out the pin on the right side of the tractor and then the left side.

Locate the two J-shaped pins on the left and right sides of the tractor which hold the cutting deck in place. This video shows how to quickly change the blades on a cub cadet riding mower. Make sure that mower is off drain the gas from the system unplug the spark plug take off the blade then replace the blade.

I also show the Oregon Precision Blade Balancer and test a few blades on it. Using a 916 socket. Repeat the removal process for the mowers second blade.

Visit Cub Cadet for a great selection of premium riding lawn mowers lawn tractors zero turn mowers snow blowers parts and accessories. This video shows how to quickly change the blades on a cub cadet riding mower. Assemble the new blades on the deck spindle and tighten the hardware using a torque wrench to the proper torque specified in your operators manual.

Removing and installing lawn mower blades on a Cub Cadet LTX 1050. This video shows how to change the blades on a Cub Cadet Ultima ZT1 Mower. Use a 1 18-inch wrench to remove the hex flange nut from the spindle assembly rotating the nut in a counterclockwise manner.

David McKinney is a newspaper reporter. Set the nut aside and pull the blade off of its spindle. Set your mowers deck height to the lowest setting.

Remove the hardware that secures the blade to the spindle and remove the blade. Fit the new blades on the engine spindle and tighten the bolts to the torque as indicated in your operators manual.

Pin On Mower Cubcadet