How To Remove Links From A Watch Band With Screws

What Size Screwdriver you need to use to Remove Bracelet Links As mentioned the answer is that it depends on which watch you have. After this link is removed slide the two separated links together where the pinholes align.

Watch Band Specialist Shortening Metal Watch Bands Watchbandcenter Com

This tool was designed to take the struggle out of removing bracelet screws.

How to remove links from a watch band with screws. Removing links and adjusting an Omega 1958989 watch bracelet with stainless steel screw type links with solid connection pins for a Speedmaster Moonwatch Om. The best way to identify a band with screw links is to look at the side of the band. Apply heat to the threaded part of the link at the same time.

This is the most practical friction pin removing tool to ever be created and is a necessity for anyone who works on watches. Watch Band Screw Links. The first end of the metal band should fall away from the watch case.

Heating the links would expand the metal but I thought that the main aim of the heat is to melt any adhesives holding the screw in. Toremove the pin. Make sure to hold both the watch and the screwdriver tightly during this step.

Hold the watch with one hand while you place the screwdriver in the hole with the other hand. Use your screwdriver the head of a small nail or small screw will work as well and push it into the opening first photo. Using a pair of pliers grab the pin and pull it out of the link.

It features three Swiss-made blades 10 14 25mm that have been friction fitted into a solid aluminum block. Now all that you need to do is fit the bottom screw slot of the watch band over the right blade and easily unscrew it from the top. No guarantees but worth a try.

This watch band screw removing tool is a perfect design for the removal of bracelet screws from Gucci brand and other high end fashion watches. Insert your screwdriver into the pinhole and loosen the pin until it becomes detached from inside the link. Click here to learn How to Remove T-Bar Style Band Links.

Heat is one of the best solutions however according to Loctites website the heat must be 350F for standard adhesives thats about 177C. Hold the watch case in your hand and with your non-magnetic tweezers push the remaining screw bar piece out of the watch band. If you look on the edge of the links you will see tiny screws.

If the links are solid on one side with a hole on the other side with a screw head facing up. When you can grab the screw bar with your fingers pull it free and put it in your parts tray. But many watch bracelets have screws for which you need a screwdriver with a size of 14-18mm.

Place the tip of your screwdriver on a pin head and unscrew it. I did a bit of research on how to remove threadlock. The tiny screws are the pin heads.

If you have a bracelet pin extractor you may be able to apply pressure to the threaded end while turning the slotted end with a screwdriver. The blades are made of stainless steel for removing even very difficult screws. The base is made of hardened resin plastic.

If the links have oval shaped cutouts in the back with arrows pointing toward them your watch most likely has t-bar pins holding it together. Turn the watch links on their edge so the links are vertical. Sent from my iPhone using Tapatalk.

Watch Band Specialist Shortening Metal Watch Bands Watchbandcenter Com