How To Remove Car Window Tint Without Damaging The Rear Defroster

Pull slowly while the window tint is warm. If you do try and remove tint use Saran wrap and a water spray bottle.

Tinting Over Rear Defrosters Diversity Auto Films

Here are the steps.

How to remove car window tint without damaging the rear defroster. It makes it much easier. Do not pull off the film while it is cold otherwise you will be left with a sticky residue on your window. Use your fingernail or razor blade to lift the window film in a corner of the window and try to peel the film off in one entire piece.

Step 5 Peel back one of the top corners of the tint using a razor blade. I have been a window tinter for the better part of 35 years and I will share my method. Both ways seem to work fine.

Start peeling the window film. Here is what the window looked like. Attempted DIY removal.

Turn on the heat in your car to the highest setting and park it with the rear window directly in the sun. Httpamznto2kEHrzKThis is 20year old tintThis video shows how to remove very old window tint with aircraft paint remover to avoid. It should also remove most of the glue adhesive off of your car window as the tint film is peeled away.

Tint Man explains how we remove Window Film off the rear window without messing up the rear defroster. A straight razor blade Goo Gone and warm soapy water. I will say that there are a couple methods that I use depending on the condition of the film ie.

You also need to turn on the rear defroster and leave the car for one hour. Soak the window cover it with food wrap and let it sit and soften. Cleaning rear window damaging defroster strips.

This last ditch effort to remove the tint without a professional has left behind a completely inoperable defroster and just a hint of where it once was. Using the blade gently scrape away the sticker material. How to remove window tint and not damage defroster lines or leave adhesive residue.

The car wash I go to when Im busy or when its too cold uses Stoner and regular cotton towel glass wipes. Your back window likely has lines through it those lines are part of an electrical system. The side windows are pretty clear but the rear window is a mess.

Is it turning purple with big football. Is it just too dark. I removed tint from a rear window wo defroster lines easily with ammonia soak.

The most appropriate way to remove tint from your rear window is to remove the whole tint piece altogether. My windows are tinted and the tint film adds a layer of protection on the rear glass. Heres the steamer I usedhttpsamznto2RnG2C5Music.

I ripped crappy tint off a window with defroster lines years ago no problems. There are a few things that will influence how your window tint affects your defroster and how your defroster affects your tint. Jump to Latest Follow.

Some months back I posted some pics of my car and one of the flaws that drove me nuts got pointed out. By going slow youll remove the tint off the back window without damaging the defrost grid. Jason Shaw - R.

I use Stoner glass cleaner and micro fiber cloths. You can see that the owner of the vehicle was unable to reach the bottom of the window and opted for scraping the rest of the tint off with a razor blade. Take your window cleaner and spray it down to get that nice clean look.

I had been afraid to attack it since Id done it once before on a work car and it turned out to be a finger numbing all day ordeal that I never wanted to do again. Works like a charm. PROBLEM - It has tint on the rear side windows and on the rear window.

Keep the tint moist with ammonia as you strip. It is not difficult to do this but you need to know which steps to take. Be careful not to cut the defroster lines.

Use Goo Gone according to the directions to remove. The important thing is to remove the window tint safely so that your defroster is not affected. The tint should peel away easily.

If you look in the rearview mirror you can barely tell what kind of car is behind you - in the daytime I will need to remove the tint film from the rear window without destroying the rear. Looking at a used car today. A small electrical current flows through them to remove or reduce condensation on the back window.

It looks pretty clean and runs well.

How To Remove Window Tint And Glue In Less Than 5 Minutes Youtube