How To Remove Ring Doorbell Cover To Charge Battery

Melanie WeirBusiness Insider Remove the battery portion of. Unscrew the screw s at the bottom of the doorbells mount to remove the Rings faceplate.

Video Doorbell 3 Wired Or Wireless Smart Doorbell Camera Ring

Learn how to charge the battery in Ring Video Doorbell 2nd Generation our next-generation smart video doorbellNeed help with your Ring device.

How to remove ring doorbell cover to charge battery. Pull the faceplate away from the body to remove it once it is loose. Using the Ring screwdriver remove the screw at the bottom of the cover. Connect the orange micro-USB charger to the charging port in the battery.

Push the faceplate off with your thumbs or pry it free. Remove the battery by pressing the release tab. Grab the cover in your hand and carefully pull it away from the body once you have snapped it free.

During charging both the red and green lights will light up. By removing the cover you can access the battery of the Ring Doorbell. How to remove charge and insert your Ring doorbell battery.

Connect any micro-USB charger to the charging port in the battery. Your battery is fully charged when the light on the battery shines a solid green. During charging both the red and green lights will light up.

Simply place the tip of the screwdriver into the security screw. Turn the screw counterclockwise and set the screw aside after taking it out. You will need a micro phillips screwdriver to remove these tiny screws.

This will expose the inside of the Ring Doorbell. Remove the security screws on the base of the doorbell and lift the doorbell up and away from the mounting bracket. I bought this to remove the screw holding the cover on my Ring 2 doorbell so I could recharge the battery.

Unscrew the faceplate from the Ring Video Doorbell 3 and remove the faceplate by pressing in on the sides and carefully pulling it out and off. For this use the previously mentioned Ring screwdriver. Now turn the screwdriver clockwise until the screw comes out.

Loosen the security screw on the base of the doorbell and lift the faceplate up and away from the wall. Connect any micro-USB charger to the charging port in the back of the Ring unit an orange charger comes inside your Ring box. Press the release tab to remove the battery.

Pry the aluminum cover carefully off- this will reveal the 4 black screws underneath. Lift the faceplate away from the rest of the doorbell. To recharge your Ring Doorbell.

Remove the battery by pressing the release tab. Your battery is fully charged when the light on the battery shines a solid green. Connect the orange micro-USB charger to the charging port in the battery.

Remove the security screws on the base of the doorbell and lift the doorbell up and away from the mounting bracket. However the screwdriver was way too small for the socket in the screw and would not engage with the screw rendering it useless. This will be one fluid motion after you leverage the faceplate.

How To Charge Ring Video Doorbell 3 Or 3 Plus Youtube